35t Maritime Lifting Equipment CZPT CZPT Drum Anchor Winch
one.CZPTly, the installation of the windlass need to guarantee that the a few factors of the anchor chain leading out (the anchor chain barrel, the chain controller and the sprocket) are in a single line
two.Perform load: refers to the rigidity calculated at the outlet of the anchor chain wheel.
3.Overload rigidity: the short time overload ability required by the windlass.
four.Typical speed: the velocity at which two anchor chains are recovered when a few are in the h2o and are freely suspended.
5.Support load: refers to the maximum static load on the anchor chain that the anchor chain wheel brake must be able to bear.
| Design | Dian of chain wheel(mm) | Functioning load(kn) | Overhead pulling drive(kn) | Holding load(kn) | Nominal velocity(m/min) | Warping load(kn) | |||
| AM2 | AM3 | AM2 | AM3 | AM2 | AM3 | ||||
| 17.5 | seventeen.five | thirteen | fourteen.six | 19.five | 21.9 | 80 | a hundred and fifteen | 9 | 8 |
| 19 | 19 | 15.3 | seventeen.2 | 23. | 25.8 | ninety five | 135 | nine | ten |
| 20 | twenty | 17.9 | 20. | 26.9 | thirty. | a hundred and ten | 157 | 9 | 10 |
| 22 | 22 | twenty.six | 23. | thirty.9 | 34.five | 126 | 180 | 9 | fifteen |
| 24 | 24 | 24.five | 24.four | 36.8 | forty one.one | 149 | 214 | nine | 20 |
| 26 | 26 | 28.seven | 32.one | forty three.1 | 48.2 | one hundred seventy five | a hundred and fifty | 9 | twenty |
| 28 | 28 | 33.three | 37.2 | 50. | fifty five.eight | 202 | 289 | nine | 20 |
| 30 | thirty | 38.three | forty two.eight | 57.5 | sixty four.2 | 231 | 330 | 9 | thirty |
| 32 | 32 | 43.five | forty eight.six | sixty five.three | seventy two.nine | 261 | 374 | nine | thirty |
| 34 | 34 | 49.1 | 54.nine | 73.seven | eighty two.four | 294 | 421 | nine | thirty |
| 36 | 36 | fifty five.one | sixty one.six | eighty two.seven | 92.four | 329 | 470 | nine | 30 |
| 38 | 38 | sixty one.four | sixty eight.nine | ninety two.one | 103.four | 365 | 522 | 9 | forty |
| forty | 40 | 68 | seventy six. | 102. | 114. | 402 | 576 | nine | 40 |
The windlass is a mechanical gadget for throwing, lifting and retracting the anchor. It is positioned at the bow of the ship.The roller on both sides of the sprocket wheel can be employed for twisting and retracting ropes.Windlass can be divided into human windlass, electrical windlass and electric hydraulic windlass in accordance to distinct power.At existing, the Marine windlass is mainly electrical hydraulic windlass and electric windlass
4.In order to send you a most suitble design we want confirm the pursuing data.
1), what is the winch pulling potential?
2),what is the winch wire rope duration?
three),what is the wire rope diameters?
four)You want the winch with one or double drum?and for every drum pulling potential?
five),what is the winch functioning setting?
6),Are you need electricity pack?
if you have inquiry, pls contact me freely
