HangCZPT semi automated flexo printing pizaa box creating equipment
Use and efficiency
one.Circulating oil lubrication system and others printing machine structure.
2.Wallboard 40 mm thick cast iron material
three.All the drive roller , shaft fine grinding , hard chromium plating processing .
4.Automatic cycle to the ink system , pneumatic diaphragm pump , ink stability ,simple operation and maintenance . Ink filter , filter impurities , ink separation . Cleaning iseasy to operate , so the ink volume can be adjusted trace . Ink roller can be rising andseparate pneumatic rotation , to prevent downtime when the ink dries up , ink roll andconvenient cleaning .
five.Gear nogap adjusting device , make cardboard run more smoothly , printing designmore clearly not double .
six.Printing and phase structure of planetary gear electric digital phase controller 360degrees adjustment ( runand stop are adjustable ), position can be adjusted to thefirst set , long service life and easy to adjust accurately .
7.Drive gear adopt 40Gr , shaving , quenched and tempered treatment (high hardness , good wear resistance ), according to the requirements of high precisionprocessing and manufacturing , and cross slide block connections , and USES the spraylubrication mechanism , long service life , low noise , smooth operation , ensure the accuracy of tinted .
eight.Each unit electric points , pneumatic locking , relax . With alarm , warning light tipmore can improve the safety of the operation .
nine.entrance and again is equipped with urgent end switch and management in the paper feeding.
10.CAD Design modules can be any combination of multicolor printing unit .
11. With automatic counting device , it can display properly production number , andhost automatically stop after complete the preset number.
.Parameter:
| Variety | unit | YFQ1200*2000 |
| Plate roller diameter:(such as plate thickness) | mm | ¢405 |
| Plate roller duration | mm | 1600 |
| Inner width | mm | 2000 |
| Design and style speed | pcs/min | sixty |
| Max printing dimensions | mm | 1150×1600 |
| Max paper measurement | mm | 1150×1800 |
| Min paper dimensions | mm | 400×600 |
| To adapt to the thickness of the cardboard | mm | three-11 |
| Wall thickness | mm | 40 |
| Slotting width | mm | 7 |
| Corner lower width | mm | 50 |
| Overprint error | mm | ≤±0.five |
| Max slotting depth | mm | 300 |
III. Primary Configurations and parameters of machines
Paper feeding division
1. Workbench use chain plate feeding way , the manual sheet paper to adapt to the cardboard widely and general warping board are applicable .
two. Front and back axle 35 mm , three points fixed , operate effortlessly.
three.The chain firmness adjusting mechanism.
4.Attach paper pressure device ,make the warp cardboard feed into paper axis smoothly .
five. Overprint adjusting mechanism is convenient and quick adjustment plate and cardboard position.
Printing division
1. Upper paper feeding roll diameter 86 mm , paper feeding wheel outer diameter 120 mm.
two.Lowerpaper roll 155 mm , fine grinding hard chromium plating , 14 mm wallthickness .
three.Roller clearance between higher and reduce roller adopt the sliding block structure and adjusting range 0 to 10mm .
4.Printing roller:
(one)Exterior diameter is Ø398mm(diameter is Ø405mm which includes plate)
(two)Floor grinding, challenging chromium plating.
(3)Surface interval 50 mm delimit scale line , convenient version.
five.Section modifying system:
(1) CZPT planet gear , which can realize adjusting roller circumferential 360 degrees, digital display , intuitive and accurate.
(2)Axial adjusting mechanism can make the version of the roll around adjust thetotal of 100 mm . ( 5 mm unilateral)
six.Printing pressing roller
(one) External diameter is Ø155mm, wall thickness 14mm
(two)Grinding, tough chromium is plated on metal tube surface area.
(3)Roller clearance adjustment adopt the sliding block structure ,and adjusting range 0 to 12mm .
seven.Steel Anilox Roller
(1) External diameter is Ø175mm, wall thickness 22mm.
(two) Steel tube surface through special processing after carving checker ( 180-250line option )
(3) Network is consistent , uniform inking , durable.
eight.Rubber Roller
(1) External diameter is Ø165mm, wall thickness 22mm.
(two) Steel tube surface parcel wear-resisting rubber . ( 20 mm wall thickness )
(three) High special grinding , ink transfer effect is good.
(four) Ink loop adopts pneumatic diaphragm pump , ink stability , simple for operation and maintenance.
(5) ink mesh filter impurities , to protect network roll .
Slotting office
1.Upper knife shaft diameter 156 mm , the lowerknife shaft diameter 156 mm , surfacegrinding hard chromium plating , balance correction , smooth operation .
2.Line pressing wheel clearance manual adjustment , dial display adjustment data .
3.Slotting knife width is 7 . 0 mm . Alloy steel material , after heat treatment typegrinding gear slotting knife 4.Slotting knife gap worm gear box to adjust , dial , according to adjust the rangeof 0-11 mm .
five.Slotting phase adjusting mechanism , planetary gear structure
6.Slot electric digital phase using phase controller 360 degrees adjustment ( motionand stop all can be adjusted ).
7.Manual sync adjusting box height.
8.Line pressing roller diameter and 110 mm , thick wall seamless steel tube is madeof high quality , fine grinding hard chromium plating on the surface of dynamic balancingcorrection and computers . Line pressing wheel diameter ф 176 .
Transmission gear
Using 40 cr material , thickness of 50 mm , tempering gear shaving processing ,hardness of HRC50-55 degrees , high wear resistance , convenient maintenancecharacteristic .
Rack body
Thebodyadoptthe HT – 200 material , thickness of 40 mm , shock absorptionperformance is good , braced with gb channel steel , solid and stable . Rail adopt castingstructure , unit electric opening and closing .
CZPTal part of the primary characteristics :
domestic chint , famous people suchas electrical control components , reliable operation , circuit design is reasonable , simpleoperation , long service li
CZPTer go to:
Supply photos:
Carton box photographs:
Manufacturing facility method:
Associated Merchandise:
Welcome to contact us for a lot more information and movies
Sara
Internet site: http://
: 1820265717
Fax/tel: 0571 -7805687
