Substantial-Pace CNC Plate Drilling and Milling Machine Model PHD2571/PHD2525/PHD3030
Applicable business: Used for the drilling processing for tube plate, clapboard and flange, in petrochemical, boiler, and wind power flange industries,also for joint plates in developing,bridge,iron tower,etc.
Merchandise attribute:
one.Hefty-load linear roller guidebook pairs are equipped on two sides of the device mattress respectively.The longitudinal movement of the gantry’s two sides is driven synchronously by way of AC servo motor and exact ballscrew pair of large pitch.
2.Two movable slides are outfitted on the cross beam of gantry.The sliders are guided by two linear roller guidebook pairs and pushed by AC servo motor and exact ballscrew pair of huge pitch respectively.
3.The slides on the cross beam are geared up with vertical CNC feeding ram-kind drilling spindle,which adopts particular conversion motor with haeavy load for spindle.The motor drives the spindle through synchronous belt.The drilling spindle adopts ZheJiang precision spindle (innercooling) with disk spring computerized broach system,hydraulic cylinder loosing cutter,extremely hassle-free to modify shank.
four.The machine is geared up with hydraulic technique to end the hydraulic balance of vertical ram and hydraulic cutter loosing of spindle.
five.It adopts FAGOR/Siemens CNC technique of Spain,geared up with RS232 interface and Liquid crystal display display.The automated programming presented can not only create processing packages automatically,but also preview hole situation ahead of drilling.
six.It is geared up with chain-plate kind computerized chip-conveyor and chip collection trolley.The cooling method is outfitted with paper filer,high-pressure innercooling pump and reduced-pressure outercooling pump,which are utilised for innercooling or outercooling of cutter.
Item Standard Parameter:
| Design | PHD2571 | PHD2525 | PHD3030 | |
| Max. dimension of workpiece |
Max. hole distance LxW (mm) | 2000×2000 | 2500×2500 | 3000×3000 |
| Max. thickness (mm) | three hundred | |||
| Worktable | Width/length of T groove (mm) | 28/five hundred | ||
| Drilling spindle | Amount | A single or much more (By customers’ ask for) | ||
| Spindle taper | BT50 | |||
| Max. diameter of drilling (mm) | Φ40 (carbide drill) Φ50(substantial pace twist drill) |
|||
| Rotation velocity(r/min) | 30~3000 | |||
| Motor power of spindles (kW) | 22./33 | |||
| Spindle nether surface toworktable(mm) | 280~780 | |||
| Longitudinal motion of gantry (X axis) | Max. stroke (mm) | 2000 | 2500 | 3000 |
| X axis feeding speed (m/min) | ~eight | |||
| X axis servo motor energy (kW) | 3 | |||
| Horizontal shift (Y axis) | Max. length of spindles (mm) | 2000 | 2500 | 3000 |
| Y axis feeding velocity (m/min) | ~eight | |||
| Y axis servo motor electricity (kW) | three | |||
| Vertical shift (Z axis) | Z axis Max. stroke (mm) | five hundred | ||
| Z axis feeding velocity (m/min) | -4 | |||
| Z axis servo motor electricity (kW0 | three | |||
| Positioning precision | X,Y axis (mm) | ≤0.1/ (Total size) | ||
| Re- positioning precision | X,Yaxis (mm) | ≤0.05 | ||
| CZPT technique | CZPT pump(Mpa)/ (L/min) | 7 /25 | ||
| Motor for hydraulic pump (kW) | three | |||
| Chip removal and cooling | Kind of chip-conveyor | Chain-plate kind | ||
| Quantity of chip-conveyor | 1 | |||
| Chip-removal pace(m/min) | 1 | |||
| General dimension | LxWxH (m) | Appr. five.2×5.1×3.6 | Appr. five.7×5.6×3.6 | Appr. 6.2×6.1×3.six |
| Excess weight of equipment (t) | Appr. 30 | Appr. 35 | Appr. forty | |
